Beaglebone and ADXL345 example in Python

The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted...

Beaglebone and BME280 humidity sensor python example

In this article we look at another sensor - this time its the BME280 and we will connect it to our Beaglebone and we...

Beaglebone and MS5611 barometric pressure sensor example in python

In this article we look at another sensor - this time its the MS5611 and we will connect it to our Beaglebone and we...

Beaglebone and LSM303DLHC sensor example in Python

The LSM303DLHC is a system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.The LSM303DLHC has linear acceleration full scales...

Beaglebone and DS1624 temperature sensor in python

In this article we look at another sensor - this time its the DS1624 and we will connect it to our Beaglebone and we...

Beaglebone and BMG160 angular rate sensor example in python

The BMG160 is an ultra-small, digital 3-axis angular rate sensor with a measurement range up to 2000°/s and a digital resolution of 16 bit...

Beaglebone and TMP102 sensor example in python

In this article we look at the TMP102 digital sensor and we will connect it up to a BeagleboneThe TMP102 device is a digital...

Beaglebone and MLX90614 infrared thermometer example in Python

The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your...

Beaglebone and VCNL4010 proximity and ambient light sensor python example

In this article we look at another acceleration sensor - this time its the VCNL4010 and we will connect it to our Beaglebone and...

Beaglebone and RGB led python examples

In this article we look at an RGB LED connected to a Beaglebone.An RGB LED is a combination of 3 LEDs in one package:1x...

Various Beaglebone and flashing LED examples

In this example we connect 6 LEDs to our Beaglebone board and then flash them on and off, we have a Bonescript and Python...

Beaglebone and LM75 temperature sensor example in python

The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital over temperature detector. The host can query the LM75 through its I²C...

Beaglebone and SI7021 sensor example in Python

In this article we look at another Humidity  and  Temperature  Sensor - this time its the Si7021  and we will connect it to our...

Beaglebone and MMA7660FC accelerometer example in python

In this example we look at the MMA7660FC accelerometer connected to a BeagleboneThe MMA7660FC is a digital output I²C, very low-power, low-profile capacitive micro-machined...